TL;DR
- Carbon monoxide (CO) is colorless, odorless, and produced by fuel-burning heating equipment — furnaces, boilers, and water heaters among them.
- According to the CDC, more than 400 Americans die each year from unintentional CO poisoning, with more than 100,000 emergency department visits annually.
- CO risk rises every fall and winter, right as heating systems start running for hours at a stretch.
- A working CO detector on every level of the home and an annual professional check of fuel-burning equipment are the two most effective ways to prevent it.
- Call(401) 227-5410 to schedule your heating system’s annual check before you’re relying on it every day.
The Risk You Can’t See, Smell, or Hear
Carbon monoxide doesn’t announce itself. It has no color, no odor, and no taste, which is exactly what makes it dangerous — by the time symptoms show up, a home can already have unsafe levels building in the air. And heating season is when the risk climbs fastest, because that’s when the equipment most likely to produce it — furnaces, boilers, water heaters — goes from occasional use to running for hours every day.
This isn’t a reason to be alarmed about a well-maintained heating system. It’s a reason to make sure the basics are actually in place before the coldest stretch of the season arrives. At Lawrence Air Systems, we’ve spent more than 50 years helping homeowners across Rhode Island and Southeastern Massachusetts keep their heating equipment running safely, and CO safety is one of the simplest, most overlooked parts of that.
What Actually Produces Carbon Monoxide in a Home
CO is created any time fuel — natural gas, oil, propane, wood, or coal — burns incompletely. In a typical home, the CDC identifies gas- and oil-burning furnaces, water heaters, and portable generators as common sources. A furnace or boiler that’s properly installed, vented, and maintained is designed to carry CO safely outside the home. The danger shows up when something in that chain breaks down — a cracked heat exchanger, a blocked or disconnected vent pipe, a chimney clogged with debris, or equipment that was never installed quite right in the first place.
The Symptoms Are Easy to Mistake for Something Else
CO poisoning symptoms are often described as flu-like: headache, dizziness, weakness, nausea, chest pain, and confusion. That similarity is part of what makes CO dangerous — mild exposure can be brushed off as being run-down or coming down with something, especially during the same months when colds and flu are also going around. People who are asleep can be poisoned before they ever wake up with symptoms at all. If more than one person in the house feels the same unexplained symptoms at the same time, especially when everyone feels better after being outside the house, that’s worth taking seriously.
Why Heating Season Specifically Raises the Risk
More than half of all non-fire CO exposures happen between November and February, according to CDC data, which lines up exactly with when fuel-burning heating equipment runs the most. A system that’s been sitting mostly idle since last winter is being asked to work hard again, often for the first extended stretch in months — which is also when a developing mechanical issue is most likely to surface. Add closed windows, sealed-up homes, and more time spent indoors, and the conditions for CO to build up unnoticed are exactly what a New England winter creates.
Four Things That Actually Reduce Your Risk
1. Install CO detectors on every level of the home, especially near sleeping areas. The CPSC recommends battery-operated or battery-backup detectors so they keep working through a power outage, which is exactly when portable generator use — another common CO source — tends to spike.
2. Test detectors monthly and replace batteries on a schedule you’ll actually remember. Changing the clocks each spring and fall is the easiest built-in reminder, which is why so many safety campaigns tie CO detector checks to daylight saving time.
3. Have fuel-burning heating equipment professionally inspected every year. This is the single step both the CDC and CPSC point to most consistently, and it’s exactly what a Total System Cleaning and performance evaluation is built to catch — a cracked heat exchanger, an improperly vented appliance, or a blocked flue, long before CO becomes a problem.
4. Keep vents, flues, and chimneys clear of snow and debris. A blocked exterior vent pipe is one of the more common, and most preventable, causes of CO buildup during a New England winter.
This is exactly why homeowners across East Bay, Aquidneck Island, Jamestown, and out to Westport count on the experienced team at Lawrence Air Systems for their annual heating system check. We’re not just confirming the system turns on — we’re checking the specific components that keep it venting safely, which is the whole point of a professional evaluation that a homeowner can’t really do on their own.
What a CO Detector Can and Can’t Do
A working CO detector is one of the most effective, lowest-cost safety devices a home can have — but it’s a last line of defense, not a substitute for prevention. It’s designed to alert you once CO has already reached an unsafe level, not to catch the mechanical issue before it starts producing CO in the first place. That’s the gap an annual professional heating inspection is built to close: catching the cracked heat exchanger or disconnected vent before it ever becomes a CO event a detector needs to warn you about.
Homeowners enrolled in our Annual Maintenance Program get this check built into their membership every year, along with priority scheduling during exactly the weeks when heating-season service calls pick up.
The Bottom Line
CO safety isn’t complicated, but it does take two things actually being in place: working detectors in the right locations, and a heating system that’s been professionally checked within the last year. Neither one takes long. Both matter a lot more in November than they do in July.
Frequently Asked Questions
What is carbon monoxide and why is it dangerous?
Carbon monoxide is a colorless, odorless gas produced when fuel burns incompletely. It’s dangerous because it can build up indoors without any obvious warning sign, and high levels can cause illness or death within minutes.
Where should CO detectors be placed in a home?
On every level of the home and in a central location outside each separate sleeping area, per CPSC guidance. Interconnected detectors, where available, mean every unit sounds if one detects CO.
How often should CO detectors be tested or replaced?
Test them monthly, and replace the batteries (or the unit itself, depending on the model) on a predictable schedule — many homeowners use the spring and fall clock change as their reminder. Most CO detectors should be fully replaced every 5 years per the manufacturer’s instructions.
Can a furnace or boiler leak carbon monoxide even if it seems to be working fine?
Yes. A system can appear to run normally while a cracked heat exchanger or a vent problem allows CO to escape. This is exactly why an annual professional inspection matters even when nothing seems wrong.
What are the symptoms of CO poisoning?
Headache, dizziness, weakness, nausea, vomiting, chest pain, and confusion — often described as flu-like. People who are asleep or who have been drinking alcohol can be affected before they notice symptoms at all.
What should I do if my CO detector goes off?
Move everyone to fresh air immediately — outside or near an open window or door — and call your local fire department or 911 from there. Don’t go back inside until it’s confirmed safe.
Does a working CO detector mean I don’t need an annual heating system inspection?
No. A detector alerts you after CO has already reached a dangerous level. An annual inspection is what catches the mechanical issue — a cracked heat exchanger, a blocked vent — before it ever produces CO in the first place.
Who is most at risk from CO poisoning?
Everyone is at risk, but infants, older adults, and people with chronic heart disease, anemia, or breathing problems are more likely to get seriously ill from a given level of exposure, per CDC guidance.